MOTU Audio Express Guide de l'utilisateur télécharger pdf (Page 56)

CUEMIX FX

Controlling Talkback and Listenback volume

To control the volume of the Talkback and/or

Listenback mics, adjust their input fader in CueMix

FX. This fader controls the volume of the input,

regardless of which bus mix is being displayed in

the CueMix FX window. In other words, once an

input has been designated as a Talkback or

Listenback input, its fader becomes global for all

CueMix buses.

SCOPE CHANNEL SELECTION

The Scope channel selection menus (Figure 9-1 on

page 52) let you choose what input channels will be

fed to the CueMix FX audio analysis (scoping)

features. See “Devices menu” on page 57.

FILE MENU

Saving and loading hardware presets

The 4pre can store up to 16 presets in its on-board

memory. A preset includes all CueMix FX settings

for all for mix busses, but it excludes global settings

like clock source and sample rate.

The Load Hardware Preset and Save Hardware

Preset commands in the CueMix FX ﬁle menu let

you name, save and load presets in the 4pre.

Peak/hold time

In CueMix FX, a peak indicator is a line

(representing a virtual LED) displayed in a level

meter that indicates the maximum signal level

registered by the meter. The Peak/hold time setting

(File menu) determines how long this indicator

remains visible before it disappears (or begins to

drop). To disable peak/hold indicators altogether,

choose Off from this sub-menu.

Mix1 Return Includes Computer Output

When checked (enabled), the Mix1 return includes

computer Output File menu item causes audio

being sent to the main outs (Mix 1) from host

software on the computer to be included in the

Mix1 1-2 return bus. This feature can be used to

apply the audio analysis tools, such as the FFT

display and oscilloscope, to computer audio

output. See “Scoping host software audio output”

on page 57.

☛ Warning! When this option is enabled, it can

cause feedback loops! In your host software, make

sure that the stereo return bus is not routed back to

the main outs!

For more information on the Mix 1 Return feature,

see “Mix1 1-2 return bus” on page 44.

Hardware follows console stereo settings

This File menu item applies to other MOTU

interfaces products and has no effect on the 4pre.

EDIT MENU

Undo/Redo

CueMix FX supports multiple undo/redo. This

allows you to step backwards and forwards

through your actions in the software.

Copying & pasting (duplicating) entire mixes

To copy and paste the settings from one mix to

another:

1 Select the source mix (Figure 9-1) and choose

Copy from the Edit menu (or press control-C).

2 Choose the destination mix and choose Paste

from the Edit menu (or press control-V).

Clear Peaks

Choose Clear Peaks from the Edit menu to clear all

peak indicators in all CueMix FX meters.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

Commentaires sur ces manuels

Pas de commentaire

MOTU Audio Express Guide de l'utilisateur Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement MOTU Audio Express