MOTU Audio Express Guide de l'utilisateur télécharger pdf (Page 7)

CHAPTER

7

Quick Reference: MOTU Audio Console

Device Setup in Cubase

Determines the clock source for your Audio

Express. If you’re just using the analog ins

and outs, set this to Internal.

The other settings are for digital transfers

via S/PDIF or synchronization to time code

or other audio devices.

This menu lets you choose what you will

hear from the headphone jack. To mirror the

main outs, choose Main Out 1-2. Or you can

mirror any other output pair. To hear the

phones as their own independent output,

choose Phones 1-2.

Check this option if the audio software

you are using with the Audio Express

does not support Windows WDM drivers

and instead only supports legacy MME

(Wave) drivers. When checked, this

option makes all of the Audio Express

inputs and outputs available to legacy

Wave-driver compatible audio software.

Choose the global sample rate

for the system here.

Click the tabs to access general MOTU

interface settings or settings speciﬁc

to the Audio Express (or other

connected interface).

Choosing a smaller setting here reduces

the delay you may hear when listening to

live input that you are running through

effects plug-ins in your software. But

lower settings also increase the strain on

your computer. For details, see “Samples

Per Buffer” on page 29.

Click the Audio Express tab

to access these settings.

This option should be enabled (checked).

in most cases. For details, refer to “Use

stereo pairs for Windows audio” on

page 30.

How to access these settings

There are several ways to access these settings:

■ From the Windows Start menu, choose

Programs>MOTU>MOTU Audio Console.

■ From within Cubase, go to the Device Setup

window, click the MOTU Audio ASIO list item and

and click the Control Panel button.

■ From within other applications, refer to their

documentation.

If you have a foot switch connected to

the Audio Express, these settings let

you map the foot switch to any

computer keyboard key for both the up

and down position. For details about

how to set this up, see “Enable Pedal”

on page 30.

1 2 3 4 5 6 7 8 9 10 11 12 ... 81 82

Commentaires sur ces manuels

Pas de commentaire